Hydraulics - New Leader AGCO NL5258G5 Operator's Manual

Controller Operations Header

Hydraulics

This program will show a visual representation of hydraulic monitoring, including system pressure,
NOTE: temperature, conveyor pressure, and indicators for low fl uid level and fi lter restriction. Individual
bins can be viewed by pressing the bin icons along the bottom of the screen.
1. Power up Display Monitor and activate VT.
• The Run screen will appear. Press
continue.
• The Tools main screen will appear. Press
to continue.
2. View hydraulic monitoring:
• Hydraulics - System pressure, Temperature,
and status of Fluid Level and Filter Restrictions will
show system wide.
• Conveyor Pressure will display for Bin 1, and
cumulatively for Bins 2 - 4 as equipped.
• Fluid Level and Filter Restriction status are
shown in the lower right hand corner. When within
acceptable levels, the boxes are outlined in green
and display a (as shown). If fl uid level is low or
if fi lter is restricted, the box will be outlined in red
and display a
• Press to return to Tools Screen.
If the spreader does not have an onboard hydraulic reservoir, fl uid temperature, fl uid level and fi lter
NOTE:
restriction are not accurately displayed.
www.New-Leader.com
(800) 363-1771
to
- 111 -
NL5258G5/NL5300G5
314732-AA-B