Feedgate Optimizer - New Leader AGCO NL5258G5 Operator's Manual

Header Controller Operations

Feedgate Optimizer

This program will help to determine the ideal gate position for each specifi c application, based on
NOTE:
speed, swath width, density, and application rate.
1. Power up Display Monitor and activate VT.
• The Run screen will appear.
bin button at bottom of screen. Press
continue.
• The Bin Events screen will appear.
to continue.
2. Enter average speed and target rate:
• The Feedgate Optimizer screen will appear.
Using keypads, enter Average Speed and Target
Rate into appropriate fi elds for each bin.
3. Accept recommended settings:
• Recommended feedgate opening will be
displayed along with minimum and maximum
rates. If is selected, new feedgate setting will
save and automatically move to proper height.
If is selected, new settings are ignored and
system settings are kept.
www.New-Leader.com
(800) 363-1771
Select appropriate
to
Press
- 105 -
NL5258G5/NL5300G5
314732-AA-B