Reconfi Gure System - New Leader AGCO NL5258G5 Operator's Manual

Controller Operations Header
Reconfi gure System
Pressing "Reset" under "System Settings will restore all settings to factory default and all
NOTICE! calibration numbers will be lost. It should only be pressed if instructed to do so by service
technician or New Leader product support.
• Press
• "Reconfi gure" allows the user to adjust any of
the system settings made during fi rst time start
up ("Machine Confi guration" steps). "Reset"
will restore all settings to factory default and all
calibration numbers will be lost.
• Display will then jump to GPS offset screen. See
"GPS Offsets" in this section for details.
314732-AA-B
to reset/reconfi gure system.
- 86 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771