New Leader AGCO NL5258G5 Operator's Manual page 114

Controller Operations Header
2. Select bins:
• Select bins to be fl ushed by pressing enable
buttons next to each. To adjust conveyor RPM for
fl ush, press
3. Set conveyor RPM:
• Use keypads to set conveyor RPM for each bin. 20
RPM is default.
• Bin 1 Maximum = 50 RPM
• Bin 2 Maximum = 60 RPM
• Bins 3 & 4 Maximum = 85 RPM
Press to continue.
4. Perform bin fl ush:
• To fl ush bins, press
is pressed.
When process completes, press
Do not work near rotating spinners.
WARNING Severe injury can result from contact
with moving parts.
• When exiting Bin Flush process, spinners will
restart. Plug PWM valves back in if it was
previously disabled. Press
314732-AA-B
.
. Conveyors will run until
to continue.
to continue.
- 114 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771