New Leader AGCO NL5258G5 Operator's Manual page 91

Header
Controller Operations
• Enter starting spinner speed, spinner assembly
fore/aft scale position and desired swath width.
• Turn on spinners and drive through the test
course.
• Collect and analyze spread pattern test results
from pans.
• Make adjustments and repeat test as necessary
to achieve desired results.
• Press once an acceptable spread pattern
has been achieved.
• Material profi le is now successfully calibrated
for low and high rates. Press
• The next screen displays a summary of the test
results for each active bin. Press
• Enter name for new profi le, and any desired
notes. Press to continue.
www.New-Leader.com
(800) 363-1771
to continue.
to continue.
- 91 -
NL5258G5/NL5300G5
314732-AA-B