Table of Contents
Advertisement
Controller Operations
Header
•
Enter the minimum rate to be used for Min Rate.
•
Enter the average between the minimum rate and
maximum rate to be used for Avg Rate.
•
Repeat for each active bin.
Feedgate Optimizer will suggest a new
NOTE:
gate height if desired application rate is
not possible with current gate height.
•
Press
to continue.
•
Press
test at lowest entered rate.
•
Press
to continue.
•
Enter starting spinner speed, spinner assembly
fore/aft scale position and desired swath width.
• Turn on spinners and drive through the test
course.
• Collect and analyze spread pattern test results
from pans.
• Make adjustments and repeat test as necessary
to achieve desired results.
• Press
once an acceptable spread pattern
has been achieved.
•
Press
test at the average rate.
•
Press
to continue.
314732-AA-B
to start spread pattern
to start spread pattern
- 90 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771
Advertisement
Table of Contents
Troubleshooting
