Omron ZW Series User Manual page 45

■ Extending fiber cable
To extend the fiber cable on the Sensor Head, use an extension fiber cable and
connecting adapter.
Mate the convex section on the fiber cable with the groove
on the connection adapter and turn the threaded section
clockwise while pushing in.
In the "No good" status in figure below, optic signals cannot
be transmitted and correct measurement is not possible.
Always check that the system is in the "Good" status.
Good
No good
Extension fiber cable (option)
Model
ZW-XF02R
ZW-XF05R
ZW-XF10R
ZW-XF20R
ZW-XF30R
Connecting adapter (option)
Model
ZW-XFC
Connecting adapter
ZW-XFC
Sensor Head
Extension fiber cable
fiber cable
Convex
Groove
section
Length
2 m
5 m
10 m
20 m
30 m
About Installation and Connection
ZW-XF_ _R
2 m/5 m/10 m/20 m/30 m
Chapter 1
ZW
1-17
User's Manual