Omron ZW Series User Manual page 104

Chapter 3
Setting the Output Conditions
As an example, here is an explanation of the procedure for selecting the "Span" setting
for the manual scaling type, and the "1.2" inclination coefficient setting.
Operating procedure
Steps
1 - 5 For moving to SCALE, see steps 1 to 5 in p.3-22
6
7
8
9
ZW
3-26
User's Manual
Key operation Display
ZERORST/ ZERORST/ ESC ESC
ZERO/ ZERO/ SET SET
ZERORST/ ZERORST/ ESC ESC
ZERO/ SET ZERO/ SET
ZERORST/ ESC ESC
ZERORST/
ZERO/ SET ZERO/ SET
RUN RUN
H L
FUN FUN
L
TEACH TEACH
Select "Manual" as the scaling type.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "MANUAL" and press
Set "Span" as the manual scaling type.
Press or keys to select either of "SPAN" and
press key.
ZERO/ SET ZERO/ SET
Set "1.2" in the inclination coefficient.
The current setting value is displayed on the sub-
display.
Press key to enter the editing mode, and the
ZERO/ SET SET
ZERO/
sub-display blinks.
To edit numerical values use
Enter "500" and press
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Description
key.
ZERO/ SET ZERO/ SET
/ / / keys.
key.
ZERO/ SET ZERO/ SET