Omron ZW Series User Manual page 193

■ Processing unit data acquisition command <DG command>
Acquire the measurement data and setting data of the processing unit.
<Command format>
D G
Space
<Response format>
• Normal processing
Setting value (N letter)
• When a command was not successfully processed
E R CR
<Parameter explanation>
Parameter
Unit number
Data number
For unit numbers and data numbers, refer to "Processing Item Data List" (p.7-13)
CR
Unit number
Space
Data number
CR
Specifies the unit number (0 to 255) to be acquired.
Specifies the data number (0 to 255) to be acquired.
Connecting Using RS-232C Cable
Details
Chapter 5
ZW
5-17
User's Manual