Lcd Display Fault Conditions - JLG 15MVL Operation And Safety Manual

In the LCD Display Symbols illustration item (2), the Function
Display or Function Disabled Indicators will vary as shown fol-
lowing:
DRIVE Disabled
LIFT UP Disabled
LIFT DOWN Disabled
Both LIFT UP and LIFT DOWN
Disabled
Drive Speed Cut-Back -
Turtle) Mode Engaged
(When Platform is Elevated)
Battery Charger (AC) Plugged In
3121230
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION

LCD Display Fault Conditions

Table 3-2, LCD Display - Operation Fault Conditions show com-
mon LCD display Fault indications which may occur during
operation and are usually caused by either an error in machine
operation or a work area condition. These fault conditions can
usually be corrected by the operator and do not require a quali-
fied mechanic to repair.
AFTER A FAULT CONDITION IS CORRECTED THE MACHINE POWER MAY NEED
TO BE RECYCLED TO RESET THE GROUND CONTROL STATION.
– JLG Lift – 3-11