Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
PLATFORM
FAULT
LEDS
CODE
FLASHING
34
—
35
—
NOTE:
The fault conditions shown above are fault conditions which the Operator may be able to resolve. Should a fault occur and be displayed on the LCD screen which cannot be corrected at the Oper-
ator's level, the problem must be referred to a qualified JLG mechanic. A complete table of Fault Codes is listed in the TroubleShooting Section of the Service and Maintenance Manual.
3-14
Table 3-2. LCD Display - Operation Fault Conditions (Continued)
LCD SYMBOL SCREEN
FAULT DESCRIPTION/
LCD TEXT SCREEN
MACHINE CONDITION
Aux. #1 - Platform Gate Open or No
Pressure on the Platform Enable
switch.
Aux. #1 - Platform Enable switch
depressed during Machine Power-
up.
– JLG Lift –
LOOK FOR THIS
Close Platform Gate or Depress
Platform Enable switch during
machine operation.
Do Not Press on Platform Enable
switch during Machine Power-Up.
3121230
Advertisement
Table of Contents
