ITEM
COMPONENT
Hydraulic Oil
1
Mast Chains
2
Key to Lubricants: MPG - Multipurpose Grease
HO - Hydraulic Oil - ISO-Vg grade 32, 46.
CL - Chain Lube. Use a good quality chain lubricant
Notes: (a)Be certain to lubricate like items on each side of the machine.
(b)Recommended lubricating intervals are based on normal use. If machine is subjected to severe operating conditions,
such as a high number of cycles, location, corrosive/dirty environment, etc., user must adjust lubricating requirements accordingly.
(c)Prior to checking hydraulic oil level, operate machine through one complete cycle of lift function (full up and down). Failure to do so
will result in incorrect oil level reading on the hydraulic reservoir.
3121230
SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
Table 5-5.Lubrication Intervals for Various Components
(a)
NO/TYPE
LUBE/METHOD
LUBE POINTS
Fill To Line on
HO - Check Hyd. Oil
Reservoir
Level
5 Qt. Reservoir
HO - Change Hyd. Oil
2 - Per Mast
CL - Brush or Spray
Section
(b)
INTERVAL
3
6
1
MONTHS
MONTHS
YEAR
✔
– JLG Lift –
COMMENTS
2
YEARS
✔
Check fluid level every day.
Change hydraulic oil every 2 years.
Inspect, lubricate if dry or rusting.
(c)
5-13