Oss - Pre-Start Inspection Of Operation - JLG 15MVL Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
1
2
Figure 3-10. OSS - Pre-Start Inspection of Operation.
3-40
Pre-Start Inspection
1. Electronic Module LED Indicator (a)
2. Detection Zone
3. Place a pad of paper or similar size object, 6 to 12 in. (15
to 30cm) individually beneath each transducer to
check detection.
NOTE: (a) The LED Indicator will flash when an object is detected
at each sensor. Remove object and allow the LED to stop
flashing before testing next sensor.
3
– JLG Lift – 3121230