Table of Contents
Advertisement
SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5.4 GROUND CONTROL STATION -
PROGRAMMING
General
The MVLMSP/MSP machine Ground Control Station allows on-
board programming of various component and control function
personality settings.
Programming may be required under circumstances such as:
• Optional equipment has been added to the machine in the
field and a function must be enabled before operation.
• Customizing the machine to fit a specific application, such
as changing the LCD display language.
Programming Levels
There is one (1) password protected programming level avail-
able to the Operator:
• Level-3: Operator's Settings -
Level-3 Password: 33271
5-14
Operator Programming Mode
In the Operator Level Programming Mode the following items
are shown on the main menu (See Table 5-6. for Setting Range
and Default Factory Setting):
• Tilt Sensor
Allows viewing current tilt sensor individual X and Y direc-
tion degree reading.
• Program
Allows programming of the items shown in Table 5-6. on
page 5-16, the following is a brief explanation of each pro-
gramming item.
NOTE: There are two production modules available at this time,
one for North/South American and European languages,
and one for Asian languages. All programmable items
between these modules are identical with the exception of
language selection.
• Back To Main - When selected, will return to main level
menu.
• Set Language - Selects the language that text on the
LCD screen will be displayed.
• Set Sleep Time - Allows setting the length of time the
machine will remain powered up without control input
before powering itself down.
– JLG Lift –
3121230
Advertisement
Table of Contents
