Table of Contents
Advertisement
1.3
OPERATION
General
• The JLG MVL/MSP Model Lifts are electric self-propelled
machines with an aerial work platform mounted to an ele-
vating aluminum mast mechanism. The personnel lift's
intended purpose is to provide personnel access to areas
above ground level.
The MSP model lift is intended for stock picking purposes in
retail stores or warehouses
of stock from storage or display
• Do not use the machine for any purpose other than posi-
tioning personnel, their tools and equipment, or for hand
stock picking.
• Never operate a machine that is not working properly. If a
malfunction occurs, shut down the machine.
• Never slam a control switch or lever through neutral to an
opposite direction. Always return switch to neutral and
stop before moving the switch to the next function. Oper-
ate controls with slow and even pressure.
• Do not allow personnel to tamper with or operate the
machine from the ground with personnel in the platform,
except in an emergency.
• Do not carry materials directly on platform railing unless
approved by JLG.
3121230
to allow placing and removing
areas.
– JLG Lift –
SECTION 1 - SAFETY PRECAUTIONS
• Always ensure that power tools are properly stowed and
never left hanging by their cord from the platform work
area.
• Fully lower mast assembly and shut off all power before
leaving machine.
• When performing welding operations at elevation, precau-
tions must be taken to protect all machine components
from contact with weld splatter or molten metal.
• Battery fluid is highly corrosive. Avoid contact with skin and
clothing at all times.
• Charge batteries on in a well ventilated area.
Trip and Fall Hazard
• JLG Industries, Inc. recommends that the operator in the
platform wear approved fall protection attached to an
authorized lanyard anchorage point. Reference "StockPick-
ing Platform Operation" on page 28 for fall protection
requirements applicable to stockpicker platforms operated
with the rails in the open position. For further information
regarding fall protection requirements on JLG products,
contact JLG Industries, Inc.
1-3
Advertisement
Table of Contents
