Table of Contents
Advertisement
3.1
GENERAL
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICA-
TION AND OPERATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR
CONFORMING WITH GOOD SAFETY PRACTICES.
This section provides the necessary information needed to
understand control function and operation.
3121230
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
SECTION 3. MACHINE CONTROLS, INDICATORS AND OPERATION
3.2
MACHINE DESCRIPTION
The JLG MVL/MSP Model Lifts are electric self-propelled
machines with an aerial work platform mounted to an elevating
aluminum mast mechanism. The personnel lift's intended pur-
pose is to provide personnel access to areas above ground level.
The MSP model lift is intended for stock picking purposes in
retail stores or warehouses
stock from storage or display
The primary control station is located in the platform. From the
Platform Control Console the operator can drive the machine
and raise or lower the platform.
The controls of the programmable Ground Control Station are
to be used during machine power-up, machine maintenance or
in case of emergency should the operator in the platform be
unable to lower the platform.
Vibrations emitted by these machines are not hazardous to an
operator working in the platform.
The continuous A-Weighted sound pressure level at the work
platform is less than 70db (A).
– JLG Lift –
to allow placing and removing of
areas.
3-1
Advertisement
Table of Contents
