Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
StockPicking Platform Operation
The stockpicking platform is available in two (2) versions.
• Fixed side-rail version
• Folding side-rail version
THE STOCKPICKER PLATFORM ALLOWS THE MACHINE TO BE OPERATED IN AN
OPEN RAIL CONFIGURATION (SEE ILLUSTRATION).
CE SPECIFICATION MACHINES:
THE OPERATOR MUST WEAR A FULL BODY HARNESS EQUIPPED WITH A LAN-
YARD SHORT ENOUGH TO PREVENT A FALL FROM THE PLATFORM. THE LAN-
YARD MUST BE ATTACHED TO THE AUTHORIZED LANYARD POINT. ALSO, JLG
RECOMMENDS THAT CE SPECIFICATION MACHINES EQUIPPED WITH THE
STOCKPICKER PLATFORM ARE ONLY TO BE USED FOR STOCKPICKING APPLI-
CATIONS.
NON-CE UNITS:
THE OPERATOR MUST WEAR A FULL BODY HARNESS WITH A LANYARD (MAX.
6 FT. (1.82M) ATTACHED TO THE AUTHORIZED LANYARD POINT OR A BODY
BELT EQUIPPED WITH A LANYARD SHORT ENOUGH TO PREVENT A FALL FROM
THE PLATFORM.
WHILE OPERATING THE MACHINE IN THE OPEN RAIL CONFIGURATION,
ALWAYS OPERATE THE MACHINE FROM THE REAR OF THE PLATFORM WITH
THE MID-GATE CLOSED AND THE PLATFORM CONTROL CONSOLE ATTACHED
TO THE FIXED PORTION OF THE GUARDRAIL.
3-28
Model
15MSP
20MSP
1. Primary Entrance/Exit Gate
2. Primary Entrance Latch
3. Lanyard Attach Point -
(on mast and platform rail)
– JLG Lift –
STOCKPICKER PLATFORM
(WITH FOLDING SIDE-RAILS) (MSP)
Max. Capacity
500 lb. (230 kg)
400 lb. (180 kg)
4. Platform Control Console
5. Mid-Gate
6. Gate Release/Lock Pins
7. Secondary Exit Gate
3121230
Advertisement
Table of Contents
