Fall Protection - Lanyard Attachment - JLG 15MVL Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3.9

FALL PROTECTION - LANYARD ATTACHMENT

JLG INDUSTRIES, INC. RECOMMENDS THE OPERATOR IN THE PLATFORM
WEAR A FULL BODY HARNESS WITH A LANYARD ATTACHED TO AN AUTHO-
RIZED LANYARD ANCHORAGE POINT.
The lanyard attach point for MVL/MSP machines depends on
the type of platform attached to the machine.
• Quick Change (removable) platforms use a lanyard attach
point located on the lower left side of the mast header, just
behind the platform (see illustration).
• Fixed platforms (bolted permanently to the mast), have lan-
yard attach points located on the mid or upper platform rail
at the rear of the platform. See specific platform illustration
starting at "PLATFORM CONFIGURATIONS" on page 3-24.
3-30
AFTER ENTERING THE PLATFORM, BEFORE BEGINNING OPERATION ALWAYS
CLOSE THE PLATFORM ENTRY GATE(S).
– JLG Lift – 3121230