Omron SYSMAC CS Series Instruction & Reference Manual page 462

3. Instructions
 Storage of ASCII Text
The following diagrams show how the ASCII text number is converted to floating-point data. Different
conversion methods are used for numbers stored with decimal notation and scientific notation.
ASCII Character Storage
S
00
Decimal notation
15 8 7
Sign
(20)
Digit
(20)
00
Scientific notation
15 8 7
Sign
(20)
Digit
(20)
Digit
. (2E)
Digit
Sign
E (45)
Digit Digit
00
428
FVAL(449) converts the ASCII characters
starting with the leftmost byte of S and
continuing until a byte containing 00 hex is
reached. There must be a byte containing
00 hex within the first 25 bytes.
Up to 00 hex
(25 characters max.)
25 characters max.
0
Integer part
Fractional part
Sign
SP SP
Decimal
The 7th and higher digits are ignored. (The sign, decimal point,
point
and exponent characters are not counted as digits.)
Any spaces (20 hex) or zeroes (30 hex)
before the first digit are ignored.
Positive number: Space (20 hex) or Plus sign (2B hex)
Negative number: Minus sign (2D hex)
25 characters max.
0
Integer part
Fractional part
Sign
SP
Decimal
point
The 7th and higher digits are ignored.
(The sign, decimal point, and exponent
characters are not counted as digits.)
Any spaces (20 hex) or zeroes (30 hex)
before the first digit are ignored.
Positive number: Space (20 hex) or Plus sign (2B hex)
Negative number: Minus sign (2D hex)
00
Exponential part
Sign
E 00
Positive: + (2B hex)
Negative: - (2D hex)
E (45)
CS/CJ/NSJ Series Instructions Reference Manual (W474)