N&W Global Vending Krea Installation - Use - Maintenance page 43

r
EturN virtual pricE
If the payment system is set with BDV and/or Executive
protocol and for combined or virtual selections (whose
relative menus are on the slave machines), with this
option it is possible to establish whether to keep (OFF)
or not (ON) the partial amount, in case the second selec-
tion/dispensing should fail.
r m
EsEt iNislavE
With this function it is possible to reset all the settings re-
lated to the master/slave function on the slave machine.
m
oNitor slavE
With this function it is possible to scroll all the informa-
tion related to a possibly connected slave machine.
By switching on the "slave" machine with the display on
this function, the display will show in sequence the infor-
mation of the slave related to:
- Software Version
- Type of slave (XX, 0XX, 9XX)
- Presence of the photocells for dispensing detection
- Number of trays and drawers
- Presence of a device blocking the opening of the col-
lection area
- Temperature detected by the internal probe.
To exit the function it is necessary to switch off the "ma-
ster" machine.
D
isplay slavE iNformatioN
With this function it is possible to display the instant tem-
perature of the possibly connected "slave" machine.
© by N&W GLOBAL VENDING S.p.A.
Da
sErial NumbEr
With this function it is possible to vary the eight-digit
numerical code which identifies the machine (00000000
as default).
p
rogrammiNg of tHE opErator coDE
With the "Operator code" function it is possible to vary
the six-digit numerical code which identifies groups of
machines (000000 as default).
i
NstallatioN DatE
With this function the current date of the system is set as
installation date.
The date is printed when the statistics are extracted.
m
aNagEmENt of tHE Extractor
This function allows you to enable the continuous opera-
tion of the steam extractor fan during preparation of the
drinks which use instant powders.
- ON extractor fan in continuous operation
- OFF extractor fan in operation only during the prepara-
tion of the drink and for the 30 subsequent seconds.
m
aximum NumbEr of couNtErs
With this function it is possible to set the maximum num-
ber of selections to be reached for blocking the machine.
it is possible to set the counters for the selections:
- Espresso
- Instant drinks
- Espresso + instant drinks
By setting the counter to a new value, the previous count
is cancelled.
This function is active if the password to reset the
counters has previously been set.
p
assWorD to rEsEt tHE couNtErs
This function allows you to set the password to be
inputted in normal user mode (with the door closed) for
resetting the counters of the selections.
If the password is set to zero, this function is not active.
a
lErts
This function allows you to manage the counters of the
alerts "product running out".
a
lErts tHrEsHolDs
This function allows you to set the "product running out"
alert thresholds.
Use the keys � and � to scroll through the products,
and the key � to change the value.
r
EsEttiNg alErts couNtErs
This function allows you to reset the counters which ma-
nage the "product running out" alert thresholds.
37
09-2013 4485-00