Da Configuration - N&W Global Vending Krea Installation - Use - Maintenance

DA CONFIGURATION

This group of functions controls all the parameters rela-
ted to the operation of the machine.
D
atE aND timE sEttiNg
This function allows you to set the current date and time.
This data item is used by the machine for managing the
time bands and statistics.
In the absence of power supply the machine maintains
the set date and time by means of a buffer battery.
b
oilEr tEmpEraturE
This function allows you to set the working temperature,
in °C, of the boiler.
From this function, press the confirmation key � , the
temperature value flashes and it can be modified with
the keys � and �
Db
maNagEmENt
This group of functions allows you to manage the opera-
tional database of the machine
i
NitializatioN
This function shall be used in case of error of the data in
the memory or if the software is replaced.
All the statistical data, with the exception of the general
electronic counter, will be reset.
When the display is in the "Initialization" function, it is
possible to initialize the machine by resetting all the
default data.
When the confirmation key � is pressed, the display will
show the message "Confirm?". If the confirmation key
� is pressed again, some parameters will be requested
such as:
- nation: meant as a type of basic doses for the various
selections
(e.g. IT coffee = 60 cc - FR coffee = 106 cc).
The "nations" provided vary, depending on the model.
- layout: for each model and type of doses, there are
a certain number of Button-Selection combinations
among which it is possible to choose (the combinations
for each layout are indicated in the doses-selections
table supplied with the machine).
- tank: It defines whether the water supply is:
0 - from the mains
1 - from an internal tank
By confirming the options, the message "Execution" is
displayed for a few seconds.
© by N&W GLOBAL VENDING S.p.A.
s Db
avE custom
This allows you to save the current configuration of the
machine on an external memory; this function is useful in
case of customization (for example to the parameters of
the selections) as compared to the factory settings.
r Db
EstorE custom
This allows you to restore the customized configuration
of the machine which was previously saved with the
function "Save modified DB".
In case the factory settings need to be restored, it is
necessary to initialize the machine.
D
isplay
This group of functions controls all the parameters rela-
ted to the display.
l
aNguagE
It is possible to choose the language, among those
foreseen by the software, used for the messages shown
on the display.
p
romotioNal mEssagE
E
NabliNg tHE promotioNal mEssagE
This function allows you to enable the display of the
promotional message which has been set
s
EttiNg tHE promotioNal mEssagE
The message of 5 rows of 16 characters can be compo-
sed by using the keys � and � for scrolling the availa-
ble characters.
By pressing the confirmation key � the first character
that can be modified flashes.
The message is stored by pressing the key � .
p
romotioNal imagE
This allows you to enable/disable the promotional image
shown on the display in normal user mode:
- ON: in normal user mode the message "Select drink"
is alternated, every 3 seconds, with the promotional
image
- OFF: in normal user mode, only the message "Select
drink" is shown
c
oNtrast sEttiNg
This function allows you to adjust the contrast of the
display from a minimum of 5% to a maximum of 99%
(default).
33
09-2013 4485-00