Instant Drinks Dispensing - N&W Global Vending Krea Installation - Use - Maintenance

INSTANT DRINKS DISPENSING

The dispensing cycles of the various selections are stu-
died for obtaining the best result in terms of productivity
and quality of the drinks.
The instant drinks are dispensed following a recipe
in which the ingredients (max 4) are identified with
a number and the product name and described by
the water and product quantities and the dispen-
sing and mixing times.
These values are programmable via software with
appropriate functions.
Even the dispensing order of the individual ingre-
dients within a recipe is programmable.
The powder for chocolate-based selections is dispen-
sed intermittently, whereas the powder for coffee-based
selections is dispensed before the water.
Warning !!!
Make sure that the mixer is rinsed correctly without
leaving any powder residue.
p
rEsElEctioNs
Based on the layout that has been set on the machine,
it is possible to have different preselections; the prese-
lections foreseen for each layout are described in the
doses-selections table (layout selections) supplied with
the machine.
© by N&W GLOBAL VENDING S.p.A.
D
osErs calibratioN
For the correct conversion of the amounts of the product
dose it is possible to set the value of the rate of each
of the dosers in g/sec for calculating the grams to be
dispensed.
a
DjustmENt of tHE WatEr tEmpEraturE
The temperature of the boiler is controlled by the softwa-
re:
The default value is 199.4° F for the boiler and it can be
adjusted directly from the menu.
v
ariatioN of tHE sEttiNg for iNstaNt proDucts
The grammage of the instant products, the dose of water
and the temperature are controlled directly by the micro-
processor.
The variation of these values is therefore performed
through the programming procedures.
21
09-2013 4485-00