N&W Global Vending Krea Installation - Use - Maintenance page 40

c
olour of staNDby ligHts
This function allows you to choose whether to leave the
keyboard lights:
- OFF
- ON, choosing the colour among the preset ones, when
the machine is on standby.
c
urrENcy symbol
This function is active only if the machine has a payment
module.
It allows you to enable, when the credit is displayed, the
symbol of the currency that has been set (€, $, or £)
u
sEr Display
With this feature it is possible to enable and choose
which kind of information you want to see on your display
during normal operation.
Information you can see are:
- Time
- Cellar temperature of "slave" machine
m
ENu maNagEmENt
p
assWorD
This is a 5-digit numerical code which is requested for
displaying all the functions of the menu.
By default, the value of this code is set to 00000
From this group of functions it is possible to enable and
set the password.
E
NabliNg tHE loaDEr mENu
With this function it is possible to make visible or not the
loader first level menu.
Using the keys � and � , you can scroll through the
items of the first-level loader menu; the key � can be
used to modify the status of the chosen menu (ON/OFF).
s
taNDby DirEct kEys
The function allows you to enable 3 of the 6 keys located
inside the door.
Each enabled key can be associated to a direct function.
(see direct keys functions)
D
irEct kEys fuNctioNs
This function allows you to associate the following fun-
ctions with the keys located inside the door:
- OFF (no function associated with the chosen key)
- Faults reset
- Mixer wash
- Infuser unit wash
- Display number of strokes
- EVADTS connection
- Loading the tubes of a coin mech
- Unloading the tubes of a coin mech
© by N&W GLOBAL VENDING S.p.A.
E
sprEsso uNit
p -
rE griNDiNg
This function allows you to enable or disable the grinding
of the coffee dose for the subsequent selection. This
allows you to reduce the preparation time of a ground
coffee-based selection.
By default, this function is disabled.
E
sprEsso boost
By enabling this function it is possible to heat the hydrau-
lic circuit and the espresso unit before an infusion of
espresso.
In the event that no coffee-based selections are made
for a long time, a small quantity of warm water is dispen-
sed before the release of the coffee dose.
c
offEE WastE
This function allows you to set the number of selections
of "espresso" and "fresh brew" after which the machine
displays the request to empty the residue container.
r
EsEt of coffEE WastE couNtEr at start
This function allows you to enable the request to reset
the coffee waste counters when the machine is started.
Press the key � to reset or � to cancel the resetting.
f
irst coffEE HEatiNg timE
In the event no espresso-based selections are made
for a long time, the heating of the boiler is enabled for 9
seconds before performing an infusion of espresso.
g
riNDEr sHutDoWN
A sensor detects the effective rotation of the grinder
during the grinding time.
In the event of a blockage (due to foreign bodies, etc.)
the grinder is shutdown and the espresso-based selec-
tions are disabled.
This option can be used to enable/disable the check of
the grinder rotation.
E
sprEsso uNit positioN
With this function you can set the position of the group
while the dose of ground coffee is being delivered.
The regulation occurs through the Keys � and �
34
-
up
09-2013 4485-00