Performing A Blind Transfer To The Handset; Merging The Dect Intercom Call With Sip Call Into A Conference; Repeater Mode; Enabling The Repeater Mode - Yealink SIP-T58V User Manual

Setting a DECT Intercom Key Manually

Performing a Blind Transfer to the Handset

You can quickly transfer a SIP call to the handset registered to your phone.
Procedure
1. When the phone is during a call, do one of the following:
Drag the far-site window to a DECT intercom key.
l
Tap Transfer.
l
Navigate to ->DECT Intercom.
Tap the desired handset.
Related Topic
Setting a DECT Intercom Key Manually

Merging the DECT Intercom Call with SIP Call into a Conference

Procedure
1. Place a DECT intercom call and a SIP call on the phone.
2. Do one of the following:
Drag one far-site window to the other far-site window.
l
Tap Conference from the pop-up box.
Tap the desired call for a conference and ensure that the call is active.
l
Tap Conference.
Tap the Hold call to join the calls in the conference.

Repeater Mode

Repeater mode extends the radio coverage of the phone. The repeater has the same radio coverage as the base station.
This feature is especially useful for users who require mobility in large dwellings. If the repeater mode is enabled, and a
repeater is registered to the base station, the handset registered to the base station can be used either in the base sta-
tion or the repeater coverage area, thereby providing users with greater freedom in mobility.
Yealink SIP-T58V/T58A/T56A phone is compatible with DECT repeater RT10/RT20/RT20U/RT30.
Topics

Enabling the Repeater Mode

Setting the Phone to the Repeater Registration Mode
Registering a Repeater
Enabling the Repeater Mode
Procedure
1. Swipe left or right to go to the second idle screen.
2. Navigate to DECT Settings->Repeater Mode.
Using Handsets on T58V/T58A/T56A Phone
205