Changing Base Pin - Yealink SIP-T58V User Manual

1. Swipe left or right to go to the second idle screen.
2. Navigate to DECT Settings->Handsets.
3. Tap Start Paging.
All handsets that are registered to the phone will ring (paging) simultaneously and display the IP address of the phone
on the screen.
You can tap Stop Paging on the phone to end ringing (paging).

Changing Base PIN

To avoid unauthorized registration or access to some features on the phone, you should keep the base PIN secret.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Navigate to DECT Settings->Change Base PIN.
3. Enter the current PIN (default: 0000) in the Change Base PIN field.
4. Enter the new PIN in the Enter New PIN and Re-enter new PIN fields.
5. Tap
.
Note
If the double PIN feature is enabled by your system administrator, you can only use the registration PIN to register a hand-
set. Contact your system administrator for more information.
Using Handsets on T58V/T58A/T56A Phone
211