Pull An Active Call From The Slave Handset; Shared Directory; Adding Shared Contacts - Yealink SIP-T58V User Manual

Yealink SIP-T58V & T58A & T56A Smart Media Phones User Guide
Selecting a Slave Handset for Your Phone

Pull an Active Call from the Slave Handset

You can retrieve the call from the slave handset on the phone after off-hook.
Before You Begin
The slave handset is during a call, and the slave mode is selected as Take over call. And make sure there is only one call
on the handset.
Procedure
1. Do one of the following:
Pick up the handset.
l
Press the Speakerphone key.
l
Tap the line key, and then tap Call Pull.
l
The call is connected to the phone.
Related Topic
Selecting a Slave Handset for Your Phone

Shared Directory

Your phone and the slave handset can share the contacts. You can store up to 1000 contacts in your phone's shared dir-
ectory, and edit, delete, search or simply dial a contact from the shared directory.
Check with your system administrator to find out if this feature is available on your phone.
Note
For more information on how to bind a slave handset, refer to
Topics

Adding Shared Contacts

Editing Shared Contacts
Deleting a Shared Contact
Deleting All Shared Contacts
Searching for Shared Directory Contacts
Moving a Shared Contact to the Blacklist Directory
Moving a Shared Contact to the Local Directory
Placing a Call from the Shared Directory
Adding Shared Contacts
Procedure
1. Navigate to
->Share Directory.
2. Tap
.
3. Enter the name and the office, mobile or other number in the corresponding fields.
4. Tap
.
If the contact already exists in the shared directory, the phone will prompt "Contact name existed!".
208
Selecting a Slave Handset for Your Phone .