Setting The Phone To The Repeater Registration Mode; Registering A Repeater; Master-Slave Mode - Yealink SIP-T58V User Manual

Yealink SIP-T58V & T58A & T56A Smart Media Phones User Guide
3. Select a repeater from the Repeater Mode field.
4. Tap
.
The phone screen prompts you whether to reboot the dongle.
5. Tap OK.
The repeater mode is enabled after the dongle reboot.

Setting the Phone to the Repeater Registration Mode

Before You Begin
Make sure the repeater mode is enabled on your phone.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Navigate to DECT Settings->Handsets.
3. Tap Register Repeater.
The phone is in the repeater registration mode now.
Related Topic
Enabling the Repeater Mode

Registering a Repeater

Before You Begin
The repeater mode is enabled, and the phone is in the repeater registration mode.
Procedure
1. Plug the repeater into an AC outlet.
POWER LED glows green and DECT LED flashes red.
2. Enable the repeater registration mode on the phone.
If a phone is found, DECT LED will flash orange.
When DECT LED glows green/orange, the registration to the phone is successful.
Related Topics
Enabling the Repeater Mode
Setting the Phone to the Repeater Registration Mode

Master-Slave Mode

You can use the SIP-T58V/T58A/T56A phone as a master handset while binding a slave handset to it. After binding, the
account of the phone is applied to the slave handset, and all line status (for example, DND, forward) on the phone and
slave handset are synchronized.
You can use the phone while you are sitting at your desk, and use the slave handset while away from your desk to
enhance your business activities.
The master phone and the slave handset can share contacts. For more information, refer to
206
Shared Directory.