Wireless Network; Activating The Wi-Fi Mode; Deactivating The Wi-Fi Mode; Connecting To The Wireless Network - Yealink SIP-T58V User Manual

Yealink SIP-T58V & T58A & T56A Smart Media Phones User Guide
3. Tap OK.

Wireless Network

Yealink IP phone supports Wi-Fi feature. The IP phone can be connected to the wireless network if Wi-Fi is available
within the area. For more information, contact your system administrator.
Note
Enabling Bluetooth may degrade your wireless network connection. For improved wireless network performance, you
should disable Bluetooth when it is not in use. To deactivate the Bluetooth mode, refer to
Topics

Activating the Wi-Fi Mode

Deactivating the Wi-Fi Mode

Connecting to the Wireless Network

Viewing the Wireless Network Information
Disconnecting the Wireless Network Connection
Activating the Wi-Fi Mode
Procedure
1. Do one of the following:
Swipe down from the top of the screen to enter the control center.
l
Swipe left/right to go to the second idle screen, navigate to Settings->Basic Settings->Wi-Fi.
l
2. Turn on the Wi-Fi.
The IP phone scans the available wireless networks in your area.
The touch screen displays the Wi-Fi icon.
Deactivating the Wi-Fi Mode
You should deactivate the Wi-Fi mode when you need to connect your phone to the wired network.
Procedure
1. Do one of the following:
Swipe down from the top of the screen to enter the control center.
l
Swipe left/right to go to the second idle screen, navigate to Settings->Basic Settings->Wi-Fi.
l
2. Turn off the Wi-Fi.
The Wi-Fi icon disappears from the status bar.
Connecting to the Wireless Network
Three ways to connect smart media phone to the wireless network:
Manually connect to an available wireless network
l
Wi-Fi Protected Setup (WPS)
l
Manually add a wireless network
l
When the phone is connected to a wireless network, the Wi-Fi icon
Topics
50
Deactivating the Wi-Fi Mode
will display on the status bar.
.