Stopping Transmitting Video During A Call; Changing The Video Layout During Calls; Swapping Video During A Video Call - Yealink SIP-T58V User Manual

Stopping Transmitting Video during a Call

You can unplug the camera or swipe down from the top of the screen in the video call screen and then tap Video to
stop your phone from automatically transmitting your video during a video call. However, you cannot turn off far-site
video.
If you stop transmitting video, the icon
Your camera will not transmit video to your contact and the far site cannot see you.
Stopping transmitting video does not create an audio-only call. Even if you stop transmitting video, you can see the
other party, and the call is still a video call. To place an audio-only call, contact your system administrator.

Changing the Video Layout during Calls

During video calls, near-site and far-site video images are displayed on the touch screen. You can change the video lay-
out.
The system supports three video layouts:
One large, other small: One video image displays in a large size, the other video images along the right side of the
l
screen displays in small sizes.
Full screen: One video image displays in full size, the other video images are hidden.
l
Same size: All video images display in the same size.
l
Topics

Swapping Video During a Video Call

Changing the Video Layout to the Same Size Mode During a Video Call
Changing the Video Layout to the Full Screen Mode During a Video Call
Changing the Video Layout During a Video Conference Call
Swapping Video During a Video Call
Procedure
1. Tap the near-site (small window) video during a video call.
will display on the near-site video, as shown below:
Call Features
101