Placing A Call On Hold; Resuming A Call; Ending Or Rejecting An Active Call; Ending All Calls In The Process - Yealink Teams T55A User Manual

Placing a Call on Hold

Procedure
During a call, tap

Resuming a Call

Procedure
Do one of the following:
• If only one call is placed on hold, tap Resume.
•
If multiple calls are placed on hold, tap

Ending or Rejecting an Active Call

Procedure
Tap .

Ending All Calls in the Process

You can end all calls in the process at a time.
Procedure
Do one of the following:
• If you are using the handset, hang up the handset.
• If you are using the headset, press the HEADSET key.
• If you are using the speakerphone, press the Speakerphone key.

Transferring Calls

You can transfer a call to another party using the blind transfer or consultative transfer method.
•

Performing a Blind Transfer

• Performing a Consultative Transfer
Performing a Blind Transfer
You can transfer calls to other contacts immediately without consulting with them first.
Procedure
1. During a call, tap
The call is placed on hold.
2. Enter the contact information to search and then select the desired contact.
Then the call is connected to the number which you are transferring to.
> Put call on hold.
on the right side of the desired held call.
> Transfer > Transfer now.
| Operating Calls | 33