Video/Voice Mail; Setting The Voice Mail Code; Receiving A Voice Message - Yealink SIP-T58V User Manual

Advanced Features
Related Topics
Switching Among the Handset, Speakerphone and Headset Modes
Muting/Unmuting Audio

Video/Voice Mail

Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on your IP phone.
This feature is set up on the server side and not all servers support this feature.
For SIP-T58V/A smart media phone, voice Mail feature also allows you to send video mails to someone or listen to your
voice mail messages on your IP phone. The usage of video mail is the same as that of voice mail, the following takes
voice mail as an example.
Topics

Setting the Voice Mail Code

Receiving a Voice Message

Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
Get the voice mail code from your system administrator.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Message application.
3. Tap Set Voice Mail.
4. Enter the voice mail code (for example, *4) in the desired account field.
5. Tap .
Receiving a Voice Message
When receiving a new voice mail, the phone plays a warning tone and the power LED indicator slowly flashes red. A
message of "n New Voice Mail(s)" ("n" indicates the number of unread voice messages) is displayed on the phone
screen.
155