Backup Device; Installation - NEC Express5800/R120g-2M User Manual
Hide thumbs
Also See for Express5800/R120g-2M:
- Configuration manual (49 pages) ,
- Maintenance manual (174 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.15
Backup Device
The server supports backup device such as magnetic tape drive.
1.15.1
Installation
Take the steps below to install the backup device.
1. See steps 1 to 8 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Push the lever to unlatch the expansion bay, and remove the carrier toward the front of chassis.
3. Push the blank cover to remove it.
80
Important
Use only the backup device specified by NEC.
Available unit size is 3.5 inch (about 9 cm) in width, 1.6 inch (about 4 cm) in height.
Important
Keep the removed blank cover for future use.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
