NEC Express5800/R120g-2M User Manual page 92

Chapter 2 Preparations
PCI slot performance *1
Product
Product
number
name
N8104-155F 10GBASE-T LOM Card (2ch)
[PCI Express 2.0(x8)]
N8104-160F
10GBASE-TLOM Card (2ch)
[PCI Express 2.0(x8)]
N8104-156F 10GBASE-SFP+(2ch) +
1000BASE-T(2ch)
LOM Card
[PCI Express 2.0(x8)]
N8104-157 10GBASE-T Adapter (2ch)
N8104-146 InfiniBand Adapter(1ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-147 InfiniBand Adapter(2ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-158 10GBASE Adapter(SFP+/2ch)
N8104-159 10GBASE Adapter (SFP+/4ch)
N8117-01A Additional RS-232C connector
*3
: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth  Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
*4 To install a 312 mm full-length PCI card into slot #2C, the N8116-37 Full Length PCI Card Installation Kit must be prepared in advance.
- For functional details of each card, refer to the technical guide.
- The text in square brackets in the Product name column indicates the maximum performance of the card.
- If the performance of the PCI slot and the installed PCI card differs, the PCI card operates with a lower performance.
92
Slot number #1A #1B
CPU connected
PCI standard
x8 lane
Transfer bandwidth
(per lane) *1
PCI card type *2
x8 socket
Slot size
Dedicated
Dedicated
to RAID
to LOM
Available card size
card
Controller
– 

－
– 
－ －
– –
– –
– –
－ －
– –
Express5800/R120g-2M User's Guide
#1C #2C #3C #1D
CPU1 CPU2 CPU1
PCIe 3.0
x16
x4 lane x4 lane
lane
8Gb/s
x16
x8 socket
socket
Full height
220 mm 220 mm 312 mm
max. max. *4 max.
– – – –
－ － － －
– – – –
   
   
   
   
   
 – – 
1. Installing Internal Optional Devices
#2D #3D
CPU2
x16
lane
Remarks
x16
socket
Low profile
220 mm max.
– – For additional LAN
port.
For additional LAN port
－ －
– – For additional LAN
port.
Prepare SFP+ module
N8104-129 if needed.
 
For additional LAN port
(Intel NIC).
Supports teaming
(AFT/SFT/ALB) and
bonding with an
additional 10-BASE-T
adapter
  For Infiniband
connection
Cannot be used together
with each other..
 
Up to two cards can be
mounted.
  For additional LAN port
(Intel NIC).
Prepare SFP+ module
N8104-129 if needed.
Supports teaming
(AFT/SFT/ALB) and
bonding with an
additional
10-BASE-SFP+
adapter.
For additional LAN port
 
(Intel NIC).
Prepare QSFP+
module N8104-161 if
needed.
Supports teaming
(AFT/SFT/ALB) and
bonding with an
additional
10-BASE-SFP+
adapter.
  For additional serial
port B (RS-232C).
Only one card can be
mounted.