Chapter 3 Setup - NEC Express5800/R120g-2M User Manual

NEC Express5800 Series
Express5800/R120g-2M
This chapter describes how to set up the server.
1. Turning on the Server
Power-On Self-Test (POST) is explained in this section.
2. BIOS Setup Utility (SETUP)
You can customize the BIOS settings by following the instructions in this section.
3. EXPRESSSCOPE Engine 3
EXPRESSSCOPE Engine 3 provides useful features through Baseboard Management Controller (BMC).
4. EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and maintain the server.
5. Installing Software Components
You can install Windows and bundled software by following the instructions in "Installation Guide
(Windows)".
6. Turning off the Server
Turn off power when not using the server.
Express5800/R120g-2M User's Guide
Setup
133