NEC Express5800/R120g-2M User Manual page 81

Chapter 2 Preparations
4. Insert the backup device into the carrier.
5. Secure the backup device with the four screws that come with the server.
6. Insert the carrier into expansion bay.
When the device is completely inserted, it is locked with clicking sound.
Important  Be sure to use the screws that come with your server.
 Adjust the mounting position of backup file unit so that their screw holes are
aligned with those on the carrier.
 If you feel difficult to connect a cable because the depth of backup device is too
long, move the device toward front, then connect the cable.
Note
Pay attention not to pinch the cable when inserting the device.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
81