Chapter 2 Preparations
1.7
Removing Support Bar
Remove the support bar when installing or removing the following component:
DIMM (memory module)
2.5-inch additional HDD cage
Flash Backup Unit for RAID controller
1. See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Remove the two screws from support bar.
3. Lift the support bar, and remove it from the server.
46
Processor (CPU)
PCI card
3.5-inch backup device
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices