Backup Device - NEC N8100-1410F User Manual

BACKUP DEVICE

The server has one slot for installing a backup device such as a magnetic tape drive.
IMPORTANT:
A SCSI cable K410-147(00) and PCI SCSI controller card are
necessary for installing a SCSI backup device.
Set "OFF" for the terminating resistor of the backup device you are
going to install, and set a SCSI ID different from those of other
devices. For the settings, see the manual provided with the server.
Install only a backup device specified by NEC.
The size of a backup device which can be installed in this server is
as follows:
Width: Up to about 9 cm (3.5 inches)
Height: Up to about 4 cm (1.6 inches)
0 3
1 4
2 5
Upgrading Your Server 9-57
Backup device