NEC Express5800/R120g-2M User Manual page 140

Chapter 3 Setup
 <F2> key
If you press this key, the following window appears. If you select Yes, the previous parameter(s) are
restored. If you have saved changes by selecting Save & Changes, pressing the <F2> key restores the
saved value.
Load Previous Values?
 <F3> key
If you press this key, the following window appears. If you select Yes, restore the parameters of the
currently selected item to the default setting. (This might be different from the parameters configured
before shipment.)
Load Setup Defaults?
 <F4> key
If you press this key, the following window appears. If you select Yes, the parameter you configured is
saved and SETUP closes.
Save configuration and exit?
140
[Yes] No
[Yes] No
Note
The values set on iSCSI Configuration submenu and UEFI Driver Configuration
submenu are not returned to the default setting.
[Yes] No
Express5800/R120g-2M User's Guide
2. BIOS Setup Utility (SETUP)