Expressscope Engine 3; Overview; Expressscope Engine 3 Network Configuration - NEC Express5800/R120g-2M User Manual

Chapter 3 Setup
3.

EXPRESSSCOPE Engine 3

3.1

Overview

EXPRESSSCOPE Engine 3 provides a variety of features using BMC (Baseboard Management Controller),
which is a system management LSI.
See EXPRESSSCOPE Engine 3 User's Guide for detailed information.
EXPRESSSCOPE Engine 3 monitors the power supply unit, fans, temperature, and voltage of the server. If you
have the management LAN port connected to the network, you can remotely perform the following over a web
browser or SSH client:

Manage the server

Remotely control the keyboard, video, and mouse (KVM)*

Remotely access a CD/DVD/floppy disk/ISO image/USB memory*.
* To enable this feature, the optional license for remote management (N8115-04) is required.
To actualize these functions, virtual USB mass storage (Remote FD, Remote CD/DVD, Remote USB Memory,
or Virtual Flash) is always connected as USB mass storage.
3.2

EXPRESSSCOPE Engine 3 Network Configuration

Take the steps below to use EXPRESSSCOPE Engine 3 through the Web browser.
1. Run POST following Chapter 3 (1.1.1 POST sequence). Wait until the following message appears on the
lower left of the screen.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
2. Press the <F4> key while the message is being displayed to launch ROM Utility.
3. Select your keyboard type on Keyboard Selection screen.
Express5800/R120g-2M User's Guide
3. EXPRESSSCOPE Engine 3
143