Chapter 2 Preparations
1.20
Optical Disk Drive
This section describes the procedure for installing the optional optical disk drive.
1.20.1
Installation
Install an optical disk drive in the following procedure.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Push the lock on optical disk drive to unlatch it,
and pull the tray out.
3. Remove a single screw from the tray you have
removed in Step 2, and remove the bracket.
4. Remove the dummy cover.
5. Install the optical disk drive to the tray.
Important
Do not install any unsupported optical disk drive.
Note
Keep the removed screws and dummy cover for future use.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
105