NEC Express5800/R120g-2M User Manual page 151

Chapter 4 Appendix
Code Number
CPU CPU
Clock speed
Number of CPUs, standard /
maximum
Intel Smart Cache (Last Level
Cache)
Number of cores (C) / Number of
threads (T) per CPU
Chipset
Memory Capacity, standard/maximum
Memory module
Maximum operating frequency
Error check, correction
Memory sparing
Memory mirroring
Storage Hard disk Internal (standard)
drive
Internal (maximum)
Hot swap
Interface / RAID level
Optical disk drive
FDD
Expansion bay
Expansion Supported PCI
slots slots
Dedicated to RAID
controller
Dedicated to LOM
card )
Graphics Chip / VideoRAM
Graphic display / resolution
Interface
Redundant power supply
Redundant fan
External dimensions (width  depth  height)
Weight (Minimum *3/ Max.)
Power supply unit
1034F
Intel Xeon processor
E5-2640 v4
2.40GHz
1/2
25MB
10C/20T
Intel C612 chipset
Not pre-installed (selectable option) /
Registered DIMM : 1536GB (24x 64GB)
DDR4-2400 Registered DIMM (4/8/16/32/64GB)
2133 MHz
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Supported
Supported
N/A
2.5-inch HDD: SATA 16TB (16x 1TB), SAS 28.8TB (16x 1.8TB),
2.5-inch SSD: SATA 12.8TB (16x 800GB), SAS 6.4TB (16x 400GB)
(When optional HDD cage is installed)
Supported
SATA 6Gb/s : RAID 0/1/5/6/10/50/60 (option),
SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (option)
Internal or external drive (option) *1
Optional: Flash FDD (1.44MB) *2
1x 3.5-inch bay
Full height 1x PCI Express 3.0 (x8 lane, x8 socket) (length 312 mm) (Required in 2-CPU configuration)
2x PCI Express 3.0 (x8 lane, x8 socket) ( length 220 mm )
(1 slot is required in 2-CPU configuration) *5)
1x PCI Express 3.0 (x16 lane, x16 socket) ( length 220 mm)*5 (Required in 2-CPU
configuration)
1x PCI Express 3.0 (x8 lane, x8 socket) (length 220 mm) (option)
1x PCI Express 3.0 (x16 lane, x16 socket) (length 312 mm) (Required in 2-CPU configuration)
2x PCI Express 3.0 (x4 lane, x8 socket) (length 220 mm)*5 (option)
Low profile
3x PCI Express 3.0 (x8 lane, x8 socket) (length 220 mm)
(2 slots are required in 2-CPU configuration)
1x PCI Express 3.0 (x16 lane, x16 socket) (length 220 mm) (Required in 2-CPU configuration)
2x PCI Express 3.0 (x4 lane, x8 socket) ( length 220 mm (option)
1x PCI Express 3.0 (x8 lane, x8 socket)
1x PCI Express 3.0 (x8 lane, x8 socket)
Embedded management controller chip / 32 MB
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024, 1,600x1,200
5x USB3.0 (2x front, 2x rear, 1x internal), 3x USB2.0 (2x rear, 1x internal)
2x Analog RGB (Mini D-Sub15 pin, 1x front, 1x rear)
1x Serial port (RS-232C compliant / D-Sub 9 pin, Serial port A, 1x rear, optional port can be
used (up to two ports in total),
1x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T supported, RJ45, 1x rear)
(With optional LOM card, 4x 1000BASE-T, 2x 10GBASE-T, 2x 10GBASE-SFP+, or 2x
1000BASE-T can be added)
Supported (option, hot-plug available)
Supported (standard *5, hot-plug available)
448.0 mm  734.7 mm  87.2 mm (front bezel / protrusions / inner rails excluded)
482.6 mm  776.4 mm  87.5 mm (front bezel / protrusions / inner rails included)
18.1 kg / 32.0 kg (including rails)
Not pre-installed (selectable option),
AC power supply unit
460 W/800 W/1000 W 80 PLUS Platinum compliant (bipolar grounded outlet) (hot-plug
available) (Max: 2)
100 VAC/200 VAC ± 10%, 50/60 Hz ± 3 Hz (Power cable is a required option.)
800 W 80 PLUS Titanium compliant (bipolar grounded outlet) (hot-plug available) (Max: 2)
100 VAC/200 VAC ± 10%, 50/60 Hz ± 3 Hz (Power cable is a required option.)
Express5800/R120g-2M User's Guide
N8100-
1035F 1036F
E5-2643 v4 E5-2650 v4
3.40GHz 2.20GHz
20MB 30MB
6C/12T 12C/24T
2400 MHz
1. Specifications
1038F 1039F
E5-2667 v4 E5-2680 v4
3.20GHz 2.40GHz
25MB 35MB
8C/16T 14C/28T
151