Table of Contents
Advertisement
Chapter 2 Preparations
1.17
Backup File Device
The server can contain a backup file device such as magnetic tape drive.
1.17.1 Installation
Take the steps below to install backup file device.
1.
See Steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Push the lever on device carrier to unlock the device carrier, and push it toward the front of chassis
to remove the device carrier.
3.
Push the device dummy cover to remove it.
4.
Insert the backup file device into the device carrier.
• Use only the backup device specified by NEC.
Important
• The server can contain a backup device of 3.5 inch (approx. 9 cm) in width
and 1.6 inch (approx 4 cm) in length or smaller one.
Important
Keep the removed device dummy cover for future use.
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices
89
Advertisement
Table of Contents
