Avaya VSP 7000 Technical Configuration Manual page 70

1.6.2.13 In-band Management – via L2VSN
For this example, we will create an L2VSN using mgmt VLAN 101 with I-SID 1000101 that will also be
added to nodes 8005 and 8005 that in turn will have IP Shortcuts enabled allowing for in-band IP
connectivity.
Switch
L2VSN – for management
7010 & 7011
7010
7011
Add in-band L2VSN and IP address
7010(config)#vlan create 101 name mgmt-101 type port
7010(config)#vlan mgmt 101
7010(config)#ip address 10.12.11.110 netmask 255.255.255.0 default-gateway 10.12.11.1
7010(config)#i-sid 1000101 vlan 101
--------------------------------------------------------------------------------------
For switche 7011, use the same configuration as above except for the items shown below
--------------------------------------------------------------------------------------
7011(config)#ip address 10.12.11.111 netmask 255.255.255.0 default-gateway 10.12.11.1
--------------------------------------------------------------------------------------
7010 (config)#show ip
Bootp/DHCP Mode: Disabled
Stack IP Address:
Switch IP Address:
Switch Subnet Mask:
Mgmt Stack IP Address:
Mgmt Switch IP Address:
Mgmt Subnet Mask:
Mgmt Def Gateway:
Default Gateway:
August 2015
Parameter
Mgmt VLAN
I-SID
IP address
IP address
Configured In Use
--------------- --------------- --------------------
0.0.0.0
10.12.11.110 10.12.11.110
255.255.255.0 255.255.255.0
0.0.0.0
10.136.56.42 10.136.56.42
255.255.255.0 255.255.255.0
0.0.0.0
10.12.11.1 10.12.11.1
Avaya Inc. – External Distribution
avaya.com
Value
101
1000101
10.12.11.110/24
10.12.11.111/24
Last BootP/DHCP
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
70