Avaya VSP 7000 Technical Configuration Manual page 68

1 4051-4052
===================================================================
===================================================================
SPBM SMLT-SPLIT-BEB
INSTANCE
===================================================================
1 secondary
1.6.2.12 CFM
By default, a maintenance domain level value of 4 will be used; if you wish, you can change this value to
lower or higher level if you like from 0 to 7. For this configuration example, we will provision a unique
Maintenance End Point ID for each VSP 7000 switch.
Switch
CFM
7010, 7011
7010
7011
Enable CFM
7010(config)#cfm spbm mepid 7010
7010(config)#cfm spbm enable
--------------------------------------------------------------------------------------
7011(config)#cfm spbm mepid 7011
7011(config)#cfm spbm enable
--------------------------------------------------------------------------------------
Verify Operations
7010#l2ping vlan <4051 | 4052> <routernodename | mac> <SPB node name>
7010#l2tracerotue <4051 | 4052> <mac | routernodename> <SPB node name>
Example:
7010#l2 ping vlan 4051 routernodename 7004
Please wait for l2ping to complete or press CTRL-C to abort
----70:30:18:23:98:65
1 packets transmitted, 1 packets received,
round-trip (us)
7010#l2 ping vlan 4052 routernodename 7004
August 2015
4051 0.70.11
ISIS SPBM SMLT Info
SMLT-VIRTUAL-BMAC
70:30:18:23:a8:e0
Parameter
CFM
Maintenance End Point (MEP) ID
Maintenance End Point (MEP) ID
L2 PING Statistics----
min/max/ave/stdv =
Avaya Inc. – External Distribution
disabled
SMLT-PEER-SYSTEM-ID
7030.1823.a8df
Value
Enabled
7010
7011
0(64) bytes of data
0.00% packet loss
1111/1111/1111.00/ 0.00
avaya.com
68