Avaya VSP 7000 Technical Configuration Manual page 63

-- ---------------- ---------------------- ------ -------------- ------- ------
1 IST 23-24
SPB Interface Configuration
Switches 7010 and 7011:
7010(config)#interface ethernet 1,23,24
7010(config-if)#isis
7010(config-if)#isis spbm 1
7010(config-if)#isis enable
7010(config-if)#exit
7010(config)#interface ethernet 1
7010(config-if)#spanning-tree mstp learning disable
7010(config-if)#exit
1.6.2.7 Remove default VLAN from all SPB ports
Please note if the default VLAN is removed from the rear port prior to adding a new VLAN, i.e.

adding the SPB B-VLANs as in the previous step, LACP will be disabled and will have to be
manually re-enabled again.
Remove default VLAN (VLAN 1) port membership from SPB enabled ported
Same configuration on switches 7010 & 7011
7010(config)#vlan members remove 1 1,23,24
August 2015
All Basic
Avaya Inc. – External Distribution
avaya.com
Enabled Trunk
63