Avaya VSP 7000 Technical Configuration Manual page 62

7010(config-isis)#spbm 1 nick-name 0.70.10
7010(config-isis)#manual-area 49.0001
7010(config-isis)#system-id 7030.1823.a8df
7010(config-isis)#sys-name 7010
7010(config-isis)#spbm 1 smlt-peer-system-id 7030.1823.bc00
7010(config-isis)#exit
7010(config)#router isis enable
7010#show isis system-id
==========================================
ISIS System-Id
==========================================
SYSTEM-ID
==========================================
7030.1823.a8df
--------------------------------------------------------------------------------------
For switch 7011, use the same configuration as above except for the items shown below
--------------------------------------------------------------------------------------
7011(config-isis)#spbm 1 nick-name 0.70.11
7011(config-isis)#system-id 7030.1823.bc00
7011(config-isis)#spbm 1 smlt-peer-system-id 7030.1823.a8df
7011(config-isis)#sys-name 7011
7011#show isis system-id
==========================================
ISIS System-Id
==========================================
SYSTEM-ID
==========================================
7030.1823.bc00

Enter the ALCI show isis system-id on each peer switch to get the System ID value for the spbm
1 smlt-peer-system-id xxxx.xxxx.xxxx command. Each switch in the cluster must peer with its
peer's System ID value.
1.6.2.6 SPB Interface Configuration
Since we will be adding an IST interface via the front ports, ports 23 & 24, we will add an MLT with these
port members.
Create MLT 1 to be used by the IST
Same configuration on switches 7010 and 7011
mlt 1 name IST enable member 23,24 learning disable
7010(config)#
Verify MLT configuration
7010(config)#show mlt 1
Id Name Members
August 2015
Bpdu Mode
Avaya Inc. – External Distribution
avaya.com
Status Type
62