Avaya VSP 7000 Technical Configuration Manual page 44

1.6.1.9 Remove default VLAN from all SPB ports
Please note if the default VLAN is removed from the rear port prior to adding a new VLAN, i.e.

adding the SPB B-VLANs as in the previous step, LACP will be disabled and will have to be
manually re-enabled again.
Remove default VLAN (VLAN 1) port membership from SPB enabled ported
Same configuration on all switches 7001 to 7004
7001(config)#vlan members remove 1 3,34-39
--------------------------------------------------------------------------------------
Verify VLAN membership
7004(config)#show vlan interface vids 3,34-38
Port VLAN VLAN Name
---- ---- ----------------
3 4051 BVLAN-1
---- ---- ----------------
34 4051 BVLAN-1
---- ---- ----------------
35 4051 BVLAN-1
---- ---- ----------------
36 4051 BVLAN-1
---- ---- ----------------
37 4051 BVLAN-1
---- ---- ----------------
38 4051 BVLAN-1
---- ---- ----------------
August 2015
VLAN VLAN Name
---- ----------------
4052 BVLAN-2
---- ----------------
4052 BVLAN-2
---- ----------------
4052 BVLAN-2
---- ----------------
4052 BVLAN-2
---- ----------------
4052 BVLAN-2
---- ----------------
4052 BVLAN-2
---- ----------------
Avaya Inc. – External Distribution
VLAN VLAN Name
---- ----------------
---- ----------------
---- ----------------
---- ----------------
---- ----------------
---- ----------------
---- ----------------
avaya.com
44