Avaya VSP 7000 Technical Configuration Manual page 52

1.6.1.14 Adding Service VLANs for data and vMotion
For this example, we will create an L2VSN for vMotion using VLAN 1600 with I-SID 1001600 that will also
be added to nodes 8001 and 8002 that in turn will have IP Shortcuts enabled allowing for routing to the
data center.
Switch
L2VSN – for Services/vMotion and VMware mgmt
7001, 7002, 7003, 7004
7001, 7002, 7003, 7004
7001, 7002, 7003, 7004
Create VLANs – 7001, 7002, and 7004
Same configuration on all switches
7001(config)#vlan create 61 type port
7001(config)#vlan create 1600 type port
7001(config)#vlan ports 9,10 tagging tagall filter-untagged-frame enable
7001(config)#vlan configcontrol flexible
7001(config)#vlan members add 61,1600 9,10
7001(config)#vlan members remove 1 9,10
--------------------------------------------------------------------------------------
Verify configuration
7001(config)#show vlan interface info 9,10
Filter Filter
Untagged Unregistered
Port Frames Frames
---- -------- ------------ ---- --- ------------- --------------
9 Yes Yes
10 Yes Yes
7001(config)#show vlan interface vids 9,10
Port VLAN VLAN Name
---- ---- ----------------
9 61 VLAN #61
---- ---- ----------------
August 2015
Parameter
Services/vMotion VLAN
I-SID
VMware mgmt VLAN
I-SID
MLT
PVID PRI Tagging
1 0 TagAll
1 0 TagAll
VLAN VLAN Name
---- ----------------
1600 VLAN #1600
---- ----------------
Avaya Inc. – External Distribution
Value
1600
1001600
61
10061
MLT ID = 1 with ports 9 & 10
Name
Port 9
Port 10
VLAN VLAN Name
---- ----------------
---- ----------------
avaya.com
52