Displaying Software Version Number - Thermo Scientific NESLAB EX Series Installation, Operation And Maintanance Manual

Displaying Software
Version Number
(Digital One/Digital Plus)
These values will be needed when calling Thermo Fisher Scientific for sales/
service information. The controller can display the installed software version
number. For example, for a unit with software version 082645.1A:
1. Unit is running normally and displaying reservoir fluid temperature.
No
2. Press and hold for at least 10 seconds. The display will show the first
two digits, for example: 08 .
3. Press
The display will show the remaining digits to the left of the decimal, for
example: 2645.
4. Press
The display will show the decimal point and the digit to the right of the
decimal point, for example, 1 .
5. Press
The display will show the revision letter, as its equivalent number, for
example, 1 = A.
6. Press
The display will flash between Csu and the software checksum value.
7. Press
The display returns to the reservoir fluid temperature.
- 43 -