Table of Contents
Advertisement
Section 2
Operation
Software Version
Software Version is for factory use only and will be important if
troubleshooting the microprocessor programming is ever necessary.
To access this screen, press
the down arrow, up arrow,
Silence button, then the
down arrow button four
more times.
The screen below will appear on the display:
Press the Time button beneath SwVers and the above screen will appear
showing the SHKE420HP software version in the control system memory.
To return to the previous screen, press the Time button. To return to the
Operating Screen, wait about fifteen seconds.
Temperature Sensor
Temperature Sensor Readings is for factory use only and will be important
if troubleshooting the microprocessor programming is ever necessary.
Readings
To access this screen, press
the down arrow, up arrow,
Silence button, then the
down arrow button four
more times. The screen shown below will appear on the display:
Press the Speed button beneath Temps. and the following screen will
appear, showing the temperatures being measured or read by the Main
Temperature and the Overtemperature sensors as shown (above).
To return to the previous screen, press the Speed button. To return to the
Operating Screen, wait about fifteen seconds.
Thermo Scientific
Orbital Shaker
2-19
Advertisement
Table of Contents
